elba kitchen gas hob model EGH-8903Xold gas burner – gap between outer ring and base
The New Burner
I have to buy new burner to replace the old one. I replace the base, outer ring and inner cap.
Actually no need to replace the inner cap because can use the old one but I prefer the burner have the same look and feel as the old burner model is already phased out.
elba kitchen hob – burner baseelba kitchen hob – outer ringelba kitchen hob – inner ring cap
The Working New Burner
new gas burner elbaelba new gas burnerworking new gas burner
Elba Burner Price
1) Burner Base – RM50
2) Outer Ring – RM45
3) Inner Ring – RM25
Total: RM120
elba burner price
Where To Buy Elba Burner
You can also ask for delivery with minimum delivery cost.
Anyway the front service desk is very bad. Haha better just ask for delivery.
Exact Quality Sdn Bhd
Lot 13, Jalan E1/5, Taman Usaha Ehsan,
52100 Kepong, Kuala Lumpur, Malaysia.
Tel: 03-6286 9000 I Fax: 03-6286 9004
Operation Hours: 08:30 am to 06:00 pm
(Monday – Friday, except Public Holiday)
My master bedroom Panasonic aircond of 7 years broke down. I tried to repair it several times but it kept giving me problems. So I decided to buy new one.
Choices of Aircond
I have 2 aircond to consider as replacement:
1) Panasonic Premium Aero Series Inverter 1.5HP R32 gas (Model: CS-U13VKH)
panasonic aircond CS-U13VKH
2) Daikin Smarto Inverter 1.5HP R32 gas (Model: FTKH35A)
daikin smarto FTKH35A
Aircond Considerations
For the aircond, my major considerations are:
1) Reliability
I have 2 Panasonic airconds based on my experience it is reliable doesnt give much problem. Only thing I expect that my Panasonic could last at least 10 years unfortunately only for 7 years.
At same time, I have 2 Daikin airconds so far I cant tell much of it, because I installed it at my rental properties.
So far no complaints from my tenants so it must be reliable.
I asked few servicemen most of them recommend Daikin because easy to service and find spare parts. Panasonic also easy but not as easy as Daikin.
2) Energy saving
Both Daikin Smarto & Panasonic Premium Aero Series are 5 Stars Energy Saving
Panasonic 1,010W
panasonic premium inverter aero series power rating 1:5hp
Daikin 940W
daikin smarto power consumption 1.5HP
3) Smart Features
Both Panasonic Premium Inverter & Daikin Smarto can be controlled via your smartphone and can control it anywhere as it is connected via Wifi. You need first to install its mobile apps.
Daikin Smarto & Panasonic Premium Inverter, you have to purchase its accessories to enable the mobile apps use. You need to buy one adaptor for one aircond. So if you have 5 airconds, you need to buy 5 adaptors.
panasonic cz tacg1 – enables smart features for panasonic airconddaikin wifi mobile controller
Features
Panasonic
Daikin
Remote Control
- Temperature
Yes
Yes
- Airflow Direction
Yes
Yes
- Fan Speed
Yes
Yes
- Modes
Yes
Yes
- Access Anywhere (via Internet)
Yes
Yes
View Energy Consumption
Yes
No
Timer
Yes
Yes
Manage Multiple Units
Yes
Not Sure
Error Notifications
Yes
No
panasonic mobile app energy usagepanasonic mobile app error notificationsdaikin mobile app controller
Liesha was excited to join her SK Bukit Jelutong school trip to Kidzania. She really wanted to go because she could go with her best friends. The day before going to Kidzania, she prepared her shoes, water tumbler and her bags.
According to her, she did more than 10 jobs while there. She said that SK Bukit Jelutong will organize another trip after final year exam and she would like to join again together with her friends.
Besides, teachers were really awesome by creating WhatsApp group with parents and shared live update the students photos. It made parents like joining the trip as well.
Liesha School Trip to Kidszaniask bukit jelutong school trip to kidszaniask bukit jelutong school trip to kidszaniask bukit jelutong school trip to kidszaniask bukit jelutong school trip to kidszania
I used webdriverIO library in my programming. Recently I upgraded from version 4 to version 5. To my horror so many breaking changes and not much explanation on the internet. So I put some difference on it.
WebDriveIO – Version 4
1
2
3
4
5
6
7
8
9
10
11
12
13
14
constoptions={
desiredCapabilities:{
browserName:'firefox'
}
};
constbrowser=webdriverio.remote(options);
await browser.init();
constselect="a";
constattribute="href";
let results=await browser.getAttribute(selector,attribute);
results=await browser.getHTML(selector);
WebDriverIO – Version 5
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
constoptions={
capabilities:{
browserName:'firefox'
}
};
constbrowser=await webdriverio.remote(options);
constselect="a";
constattribute="href";
let elements=await browser.$(selector);
let results=await elements.getAttribute(attribute);
elements=await browser.$(selector);
results=await elements.getHTML(selector);
The Difference
In version 5, options desiredCapabilities change to capabilities
In version 5, need to put await in remote and no need to declare init() anymore as it is deprecated.
In version 5, use $(selector) to select elements before getting elements content or attribute.
embayu damansara west scale modelembayu damansara west scale model block A & block Bembayu damansara west scale model – swimming pool and planned block Cembayu damansara west scale model – pond gardenembayu damansara west scale model – pond gardenembayu damansara west surrounding price per sqft
Show Unit with 3 Bedrooms
embayu damansara west show unit – living roomembayu damansara west show unit – living roomembayu damansara west show unit – dining areaembayu damansara west show unit – third bedroomembayu damansara west show unit – second bedroomembayu damansara west show unit – master bedroom
It is easy to set POST parameters for HTTP request.
The Flow Diagram
node red set post parameters for http request flow diagram
Steps To Set Get Parameters
1) Inject Node
– Payload – can set to anything. In my case I use timestamp
node red inject node
2) Function Node
– Set POST parameters value here
– msg.headers must set the content type.
– All the POST parameters are set inside msg.payload and the parameter names must correspond to RESTFUL API that you query.
It is easy to set GET parameters for HTTP request. You need to use the mustache brackets inside the URL itself.
The Flow Diagram
node red http request flow diagram
Steps To Set Get Parameters
1) Inject Node
– Payload – can set to anything. In my case I use timestamp
node red inject node
2) Function Node
– Set parameter GET value here
– In my case I use parameter name “path” and “limit”, set as msg.path and msg.limit
– You can use any name for your parameter name but it be the same as in HTTP Request Node
node red function node set get http request parameters
3) HTTP Request Node
– Choose method: GET
– In the URL, use mustache brackets to declare your variable {{{path}}}
– The parameter name must be same as in the Function Node
I do a lot of new wiring for my properties. Usually I just hire electrician or civil contractors to do wiring without much thought whether the wires they used are suitable or not in term of ampacity (the maximum current the conductor can carry continously).
Until one day, one electrician told me the wires that I used for my fan and lamps are too thin to carry the current. It could pose fire risks. This is eyes opener.
Few days after I got the advise, one of new wiring was overloaded. The wires inside were burnt.
wires burnt due to overload – it is used for fridge and air fryer using 0.75mm wires
So I did my own studies as a guidelines to me, so when I hire an electrician I would know whether the wires and the way they connect to the electric power is able to support or no the possible current usage.
Guidelines on Wires Size
This is a guidelines only better check with your trusted or certified electrician.
If the same wire use for fan, lamps, fridge etc, you must add all the amperes and from the derive the required wire cross sectional area.
Of course usually, electrician will put extra buffer for the wire size.
Usage
Expected Power (Watts)
Expected Current (Ampere)
Expected Wire Size - Cross sectional area (mm2)
Advisable Connection Type
Ceiling Fan
75
0.3125
0.5
Direct / Plug
Aircond (1 HP)
750
3.125
1.5
Direct
Water Heater
3,600
15
2.5
Direct
Fridge (450L)
46
0.1917
0.5
Direct / Plug
Air Fryer
1,400
5.83
2.5
Direct
Lamps
75
0.3125
0.5
Direct / Plug
Washing Machine
500
2.083
1.5
Direct
Ampacity based on single phase
Connection Type
This is my own definition not electrician definition. There are two types of connection:-
Use plug to existing plug point
Tap direct into existing wires in plug point.
Use Plug
The maximum current is 13 ampere as the fuse can only handle up to that ampere.
use plug of 13 amp
Direct Loop to Existing Plug Point
This is better at maximum if not mistaken it is loop directly to existing cable of 2.5mm2 or supported maximum current of around 22 ampere.
loop direct to plug point
What to Avoid For Wiring
Water Heater
For water heater, don’t use plug better use direct loop to existing wires. Especially water heater produces vapor that might cause short circuit and easily makes the wiring wear and tear faster.
burnt plug where water heater using plug
What is Watt, Ampere & Volts?
Watt is power unit with formula as below:
Watt (W)= Amperage (A) x Voltage (V)
Analogy with water garden hose:-
Water come out from garden hose (watts) = Water volume (Amperage) x Water pressure (voltage)
What is Wire Cross Sectional Area?
It is actually the area size of the wire “circle”. In Math, the formula for area of a circle = pi*radius^2
For example, based on below diagram the cross sectional area calculation
1
2
3
4
cross sectional area=pi*(101.9/2)^2
=3.142*50.95^2
=3.142*2,595.9
=8,156.3
cross sectional area of conductor
Recommendation on Wire Size
1
2
3
Ligthing&Ceiling Fan:1.5mm2
Aircond1.5HPandbelow:2.5mm2
Adding newplug/power point:2.5mm2
Recommended Wiring Contractor
Below is my recommended wiring contractor for Shah Alam or Kota Damansara area.
Azworld Tech (Azrin) – 0 17-376 0530
Appointment on time
Expert and reasonable charging
References
Formula Wheel Electrics – reference sengpielaudio.com
