My sink was clogged. I opened up the bottle trap but surprisingly it was clean. So meaning to say, my outlet pipe was clogged. Either I can use a snake or use high pressured water.
drain snake clog remover
Decided To Use High Pressured Water
I used high pressured water because it was easier as my bidet pipe was just near by and it could be considered as quite high pressured water.
As you notice from the video on 0:15, the water overflow back from the pipe meaning it was clogged.
Put cloths around the outlet pipe to ensure the water really flow down the pipe.
I bought IKEA PAX wardrobe at IKEA Damansara on 29th August 2021 and got it delivered on 31st August 2021. We had 50% discount for delivery thanks to Merdeka day. So we just paid RM35 for delivery.
We bought 2 sets of Ikea Pax Wardrobe with 150 cm (width) x 60 (depth) cm x 236 cm (height).
We had good experience with Ikea kitchen cabinet when we had issue with it, Ikea replaced our whole kitchen cabinet for free as it was still under guarantee.
Ikea PAX Wardrobe – 1o years guarantee
Changeable Configuration
You can change the shelves or add new shelf or drawer easily.
Why We decided To Install Ourselves the Wardrobe?
Actually we didn’t at first. But due to MCO Covid-19, Ikea didn’t do any installation until further notice.
When we received our Ikea wardrobe boxes, the delivery guy said they can do installation at 10% of total price.
We agreed to the price but they could only do it the next day.
Because we couldn’t wait and were too excited. We decided to install it ourselves.
What Are Tools Required?
Screwdrivers – 2 sets
Most of the time you just need one. But to join 2 frames together easily you need to use 2 screwdrivers.
Ikea gave one female and one male screw to join those 2 frames. So one screwdriver hold one screw while other turn to tighten the other screw.
ikea pax wardrobe – join 2 frames together
Cordless screwdriver cum cordless wood drill
Cordless screwdriver uses for closing gap of shelf supports plug and to screw L shape shelf to the frame.
cordless screwdriver cum wood drill
Wood drill bit
You need 2 sizes, the smallest one for the door handle drill and bigger one to make a whole for screw that will be used to join 2 frames.
ikea pax wardrobe – 2 sizes of wood drill bits for door handle and screw to join 2 frames
Water ruler
We used water ruler to ensure door handles were aligned horizontally.
Hammer
Hammer was used to nail the plywood at the back of the wardrobe.
F clamp – 2 sets
F clamp is used to join 2 frames together. IKEA instruction shows that we have to use 2 F clamps but I managed to do it with one F clamp because I only got one.
wood working F Clamp
How Easy it is to do it yourself the Ikea Wardrobe Installation?
Relatively it was easy but it was tiring. It took us nearly 12 hours to complete the whole wardrobe.
The hard part was installing the handle of the door. We made mistakes on it but the mistakes wasn’t that obvious.
What mistakes did we make during the installation?
Wood scar on the door handle
If drill from inside the door create wood scar on the exterior of the door. So the right way was to drill from exterior so the wood scar was only visible from the inside.
ikea pax wardrobe door handle – wood scar on the outsideikea pax wardrobe door handle – no wood scar on the outsideikea pax wardrobe door handle – drill from outsideikea pax wardrobe door handle – drill from inside
The L shape shelf
ikea pax wardrobe – L shape shelf
We wrongly assembled the L shape shelf. We had to disassembled and carefully read the IKEA instructions.
Secondly, we didn’t properly screw the L shape shelf to the frame until there was gap between the shelf and the frame body. When this happened, the drawer was stuck, it couldn’t be opened. We had to unscrew and screw it again.
One person drill the screw at the bottom of L shape shelf while the other push it to the side to avoid it from making a gap with the frame.
What tips we can give for anyone wants to do themselves?
Shelf Supports Plug
Use your cordless screwdriver to screw the supports plug to ensure there is no gap between the supports plug and the wardrobe frame.
At first, we tried to screw it manually but there was always a gap and hard to properly put the shelf on top of the supports plug.
ikea pax wardrobe – shelf supports plug
The Door Handle Wood Scar Due to Drilling
Use another unused wood at the other side of drilling section to avoid any wood scar as shown in the below videos.
Would we do it by ourselves again?
Yes. Even though it was tiring but we were excited and felt fulfilled when it was successfully assembled.
Some Photos during the IKEA Wardrobe Assembly
ikea wardrobe – frameikea wardrobe – kids helping to nail the plywoodikea wardrobe – nailing the plywoodikea wardrone – frame that can be nailed to the wallikea wardrobe – first frame completedikea wardrobe – lamp is on where door is opened